41180 Raintree Court, Murrieta, CA 92562 | Phone: 888-304-0660 | Fax: 951-304-0525


ATTENTION: Waterstone offers 29 finishes and solid stainless steel for it's kitchen faucet products. Every finish is unique and requires
different techniques for care and cleaning. Find your finish in the sections and carefully read and follow directions.


Clear Coated Finishes

ABOUT YOUR FINISH:
These finishes have a clear protective coating on them. Even though they have a protective coating, they are only considered semi-durable. If the outside clear coating is scratched or damaged in any way, the base metal finishes exposed will oxidize. Any use of an abrasive cleanser, or any abrasive pad, cloth or sponge can remove or dull the protective coating and damage the finish. Some available sink cleaners with bleach, soaps, and hand lotions will damage the finish, as can acidic organic cleansers. Always wipe your fixture down with a clean soft cloth and keep it clean and dry after use.

IMPORTANT NOTICE:
It is the responsibility of the customer to check for any material finish defects BEFORE installation. Waterstone does not warranty these finishes AFTER installation.

SUGGESTED FINISH MAINTENANCE PROCEDURE:
1. Do not allow water spots to dry on the fixture. Keep the surface clean and dry after use.
2. Periodic cleaning can be done by using a mild diluted glass cleaner (we recommend Windex). Apply the mild cleaner to a soft clean cloth, and periodically wipe your fixture down to remove water spots and surface debris.
3. Never use cleaners with bleach, abrasives, or vinegar. Never use any type of abrasive pad or sponge.

  • Antique Brass - AB
  • Antique Copper - AC
  • American Bronze - AMB
  • Antique Pewter - AP
  • Distressed Antique Brass - DAB
  • Distressed Antique Copper - DAC
  • Distressed American Bronze - DAMB
  • Distressed Antique Pewter - DAP
  • Polished Brass - PB
  • Polished Copper - PC
  • Satin Brass - SB
  • Satin Nickel - SN
  • Venetian Bronze - VB
Download Care & Cleaning Guide
Waterstone American Bronze

AMB

Waterstone American Bronze

AB

Waterstone American Bronze

AC

Waterstone American Bronze

AP

Waterstone American Bronze

DAMB

Waterstone American Bronze

DAB

Waterstone American Bronze

DAC

Waterstone American Bronze

DAP

Waterstone American Bronze

PB

Waterstone American Bronze

PC

Waterstone American Bronze

SB

Waterstone American Bronze

SN


Plated Finishes

ABOUT YOUR FINISH:
These finishes are the most durable finishes Waterstone offers. The best general maintenance is regular cleaning. Even though these finishes are considered durable, you can never use any abrasive type cleaners, clothes, or pads to clean your fixture. Always try and keep your finishes clean and dry. Trapped moisture on the surface of your finish can lead to staining. Astringent cleaners, chlorine, bleach, along with acidic based organic cleansers are potentially harmful to these finishes. Chrome plated finishes are very tarnish resistant. However, they are not indestructible and can scratch and mar.

IMPORTANT NOTICE:
It is the responsibility of the customer to check for any material finish defects BEFORE installation. Waterstone does not warranty these finishes AFTER installation.

SUGGESTED FINISH MAINTENANCE PROCEDURE:
1. Do not allow water spots to dry on the fixture. Keep the surface clean and dry after use.
2. Periodic cleaning can be done by applying isopropyl alcohol with a soft clean cloth to gently remove surface spots.
3. Never use cleaners with bleach, abrasives, or vinegar. Never use any type of abrasive pad or sponge.

  • Chrome - CH
  • Satin Chrome - SC
  • Black Nickel - BLN
  • Polished Nickel - PN
Download Care & Cleaning Guide
Waterstone Chrome

CH

Waterstone Satin Chrome

SC

Waterstone Black Nickel

BLN

Waterstone Polished Nickel

PN


Living Finishes

ABOUT YOUR FINISH:
These finishes are considered Living Finishes and have NO PROTECTIVE COATING on them. Living finishes are finishes that have a very shallow patina on their surface. Essentially, the finish is what nature would do to the surface over a long period of time. The finishes are intended to change with time and generally darken slightly where they are not being touched, and highlight where the high use points are on the fixture. Hand oils, soaps, and acidic fluids and cleaners can damage the finish. These finishes are not durable, and are easily scratched or scuffed. Any type of astringent cleaner or any type of abrasive cleanser, pad, cloth or sponge will damage the finish. To help keep the surface on the fixture from oxidizing in the packaging, Waterstone initially applies a wax to the finish surface to help protect and prevent the finish from exposure to air and oxidizing prior to installation.

IMPORTANT NOTICE:
It is the responsibility of the customer to check for any material finish defects BEFORE installation. Waterstone does not warranty these finishes AFTER the fixture has been installed.

SUGGESTED FINISH MAINTENANCE PROCEDURE:
1. Do not allow water spots to dry on the fixture. Keep the surface clean and dry after use.
2. Periodic cleaning can be done by using a micro-crystalline wax (we recommend Renaissance Wax). Apply the wax with a soft non-abrasive tissue paper, and gently buff the wax with a soft clean cloth to help remove surface spots and add a protective coating to the finish.
3. Never use cleaners with bleach, abrasives, or vinegar. Never use any type of abrasive pad or sponge.

  • Antique Bronze - ABZ
  • Caribbean Bronze - CB
  • Tuscan Brass - TB
  • Unlacquered Polished Brass - UPB
  • Weathered Brass - WB
Download Care & Cleaning Guide
Waterstone Antique Bronze

ABZ

Waterstone Caribbean Bronze

CB

Waterstone Tuscan Brass

TB

Waterstone Unlacquered Polished Brass

UPB

Waterstone Weathered Brass

WB


Living Finishes - Weathered Copper

ABOUT YOUR FINISH:
This finish is considered a Living Finish and have NO PROTECTIVE COATING on it. Living finishes are finishes that have a very shallow patina on their surface. Essentially, the finish is what nature would do to the surface over a long period of time. The finishes are intended to change with time and generally darken slightly where they are not being touched, and highlight where the high use points are on the fixture. Hand oils, soaps, and acidic fluids and cleaners can damage the finish. These finishes are not durable, and are easily scratched or scuffed. Any type of astringent cleaner or any type of abrasive cleanser, pad, cloth or sponge will damage the finish. To help keep the surface on the fixture from oxidizing in the packaging, Waterstone initially applies a wax to the finish surface to help protect and prevent the finish from exposure to air and oxidizing prior to installation.

IMPORTANT NOTICE:
It is the responsibility of the customer to check for any material finish defects BEFORE installation. Waterstone does not warranty these finishes AFTER the fixture has been installed.

SUGGESTED FINISH MAINTENANCE PROCEDURE:
1. Do not allow water spots to dry on the fixture. Keep the surface clean and dry after use.
2. Periodic cleaning can be done by applying denatured isopropyl alcohol to a clean soft cloth and gently wiping down the finish surface to clean. Do not rub too hard, in that you can remove too much of the surface patina. This step will leave the finish looking a shade darker.
3. Using a different soft clean cloth, apply a non-abrasive metal polish (we recommend “Miracle Shine” by GSM) to the cloth and gently rub the polish into the finish. This will clean, protect, and brighten up the finish after it was left darker from the alcohol cleaning in step 2.
4. Never use cleaners with bleach, abrasives, or vinegar. Never use any type of abrasive pad or sponge.

Waterstone Weathered Copper

WC


Living Finishes - Black-Oil Rubbed Bronze

ABOUT YOUR FINISH:
This finish is considered a Living Finish and have NO PROTECTIVE COATING on it. Living finishes are finishes that have a very shallow patina on their surface. Essentially, the finish is what nature would do to the surface over a long period of time. The finishes are intended to change with time and generally darken slightly where they are not being touched, and highlight where the high use points are on the fixture. Hand oils, soaps, and acidic fluids and cleaners can damage the finish. These finishes are not durable, and are easily scratched or scuffed. Any type of astringent cleaner or any type of abrasive cleanser, pad, cloth or sponge will damage the finish. To help keep the surface on the fixture from oxidizing in the packaging, Waterstone initially applies a wax to the finish surface to help protect and prevent the finish from exposure to air and oxidizing prior to installation.

IMPORTANT NOTICE:
It is the responsibility of the customer to check for any material finish defects BEFORE installation. Waterstone does not warranty these finishes AFTER the fixture has been installed.

SUGGESTED FINISH MAINTENANCE PROCEDURE:
1. Do not allow water spots to dry on the fixture. Keep the surface clean and dry after use.
2. Periodic cleaning can be done by applying mineral oil to a clean soft cloth and gently wiping down the finish surface to clean. Make sure not to rub too hard, in that you can remove too much of the surface patina surface with aggressive cleaning.
3. Once the mineral oil has been applied, with a clean soft dry cloth gently pat the finish surface to remove any excess oil on the fixture to until the fixture no longer looks “wet”.
4. Never use cleaners with bleach, abrasives, or vinegar. Never use any type of abrasive pad or sponge.

Waterstone Black Oil Rubbed Bronze

ORB


Powder Coated Finishes

ABOUT YOUR FINISH:
These finishes are powder coated color finishes. They have NO ADDITIONAL PROTECTIVE COATING. These finishes are not considered durable finishes and can be scratched, chipped or scuffed. If the exterior color coating is damaged, the exposed metal base will oxidize. Any use of an abrasive cleanser, or any abrasive pad, cloth or sponge can remove or dull the color coating and damage the finish. Some available sink cleaners with bleach, soaps, and hand lotions will damage the finish, as can acidic organic cleansers. Always wipe your fixture down with a clean soft cloth and keep it clean and dry after use.

IMPORTANT NOTICE:
It is the responsibility of the customer to check for any material finish defects BEFORE installation.

SUGGESTED FINISH MAINTENANCE PROCEDURE:
1. Do not allow water spots to dry on the fixture. Keep the surface clean and dry after use.
2. Periodic cleaning can be done by using a mild diluted glass cleaner (we recommend Windex). Apply the mild cleaner to a soft clean cloth, and periodically wipe your fixture down to remove water spots and surface debris.
3. Never use cleaners with bleach, abrasives, or vinegar. Never use any type of abrasive pad or sponge.

  • Chocolate Bronze - CHB
  • Gloss Black - GB
  • Matte Black - MB
Download Care & Cleaning Guide
Waterstone Chocolate Bronze

CHB

Waterstone Gloss Black

GB

Waterstone Matte Black

MB


Stainless Steel

ABOUT YOUR FINISH:
Waterstone’s stainless steel fixtures are actually made of solid stainless. This finish has NO PROTECTIVE COATING on it. Stainless steel is by its material nature very tarnish resistant, but by no means tarnish or stain proof. This finish will indeed oxidize naturally over time and react to its environment, and in a reaction to some chemical cleaners that have bleach in them rusting can be induced on the finish. Keep your stainless fixture wiped clean and dry, and use only a cleaner specifically made for stainless steel. Trapped moisture on the surface of your finish can lead to staining. Astringent cleaners, chlorine, bleach, along with acidic based organic cleansers are potentially harmful to stainless steel finishes.

IMPORTANT NOTICE:
It is the responsibility of the customer to check for any material finish defects BEFORE installation.

SUGGESTED FINISH MAINTENANCE PROCEDURE:
1. Do not allow water spots to dry on the fixture. Keep the surface clean and dry after use.
2. Periodic cleaning can be done by applying a “stainless steel cleaner” with a soft clean cloth to gently remove surface spots and brighten the finish.
3. Never use cleaners with bleach, abrasives, or vinegar. Never use any type of abrasive pad or sponge.

Waterstone Stainless Steel

SS


Precious Metals

ABOUT YOUR FINISH:
This finish is done with real precious metal gold plating on the brass fixture surface. This finish has NO PROTECTIVE COATING and is extremely soft. Some or all of the Gold plating will be removed if any type of polish is used. Additionally, the finish will wear aware with time. The gold plating is considered very delicate and can be easily scratched or scuffed. Any type of astringent cleaner or any type of abrasive cleanser, pad, cloth or sponge will damage the finish.

IMPORTANT NOTICE:
It is the responsibility of the customer to check for any material finish defects BEFORE installation. Waterstone does not warranty these finishes AFTER the fixture has been installed.

SUGGESTED FINISH MAINTENANCE PROCEDURE:
1. Do not allow water spots to dry on the fixture. Keep the surface clean and dry after use.
2. Periodic cleaning can be done with mild liquid soap only. Wipe gently with a soft cloth to clean.
3. Never use cleaners with bleach, abrasives, or vinegar. Never use any type of abrasive pad or sponge.

  • Polished Gold - PG
  • Satin Gold - SG
Download Care & Cleaning Guide
Waterstone Polished Gold

PG

Waterstone Satin Gold

SG